Pick your deck board. Get the CAMO system that's right for you.

Treated timber

Pressure treated timber deserves a better fastener than a cheap nail or deck screw. We recommend fastening with CAMO Edge Screws for a hidden fastening look or CAMO Collated Face Screws for Pressure Treated that won’t split or crack the boards. Both fasteners can be installed while standing up with the CAMO DRIVE™ saving you time on the job. Pro tip: place your wet pressure treated boards tightly together (they will shrink) and straighten them out with the CAMO LEVER® before fastening.

Products used with this material

Install decking while standing up with the award-winning CAMO DRIVE™ that can fasten Collated Edge and Face screws and Clips.

See product >>

Collated Edge Screws for Wood and Composite

For exclusive use with the DRIVE tool, Collated Edge Screws secure pressure treated, cedar, redwood, uncapped composite, and PVC boards through the edge.

See product >>

Collated Face Deck Screws for Pressure Treated

For exclusive use with the DRIVE tool, Collated Face Screws for Pressure Treated fasten timber up to 1-1/2 in. (38mm) thick.

See product >>
CAMO-LEVER-logo

Any board, any joist, straighten warped boards, and lock-in rows of grooved boards and clips with the LEVER® board bending tool that sets in one turn.

See product >>

MARKSMAN Pro®-X1

The MARKSMAN Pro®-X1 Tool clamps to the board and creates a 1/16 in. (1.6mm) gap while guiding two CAMO Edge deck screws into the side of the board.

See product >>

Edge Deck Screws

Pair the patented rake tip screws with a MARKSMAN tool to install a fastener-free surface easily and affordably.

See product >>

MARKSMAN Edge Tool

For a no-gap deck board installation, use the MARKSMAN Edge tool that attaches to your drill and guides one Edge screw into the side of the board.

See product >>

Premium Deck Screws

For a traditional look, use premium deck screws that draw the board tightly to the joist.

See product >>

Builders love the versatility of the DRIVE tool.

...being able to switch from edge fastening to face fastening with the same Drive system hooked up right to your drill already just made it so much easier to fasten around the edges and then go back to the actual deck surface itself.

JOSH ROSS
4th Dimension Construction

Build SMARTER, build faster.

CAMO products are easy to use, easy to learn, and usable on any deck—so you can get the job done and move on.